cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
228
Views
0
Helpful
1
Replies

VPN Clients Only See Directly Conencted Network

adcorbett_2
Level 1
Level 1

Hello - I have a Pix 515 that I am using for VPN. Everything works, except once connected, the clients (172.16.3.0) can only see the directly connected network (192.168.2.0), and not any of our other subnets. Whats missing?

1 Accepted Solution

Accepted Solutions

andrew.prince
Level 10
Level 10

Andy,

The ASA inside IP Subnet is 192.168.2.0/24 - but you do not have routes to indicate any other subnets of the 192.168.0.0/16 exist. if you have more subnets on the inside network, then you need to let eh ASA know about them eg:-

route inside 192.168.1.0 255.255.255.0 <>

You should also decided if you are going to tunnel all traffic, or split-tunnel.

HTH>

View solution in original post

1 Reply 1

andrew.prince
Level 10
Level 10

Andy,

The ASA inside IP Subnet is 192.168.2.0/24 - but you do not have routes to indicate any other subnets of the 192.168.0.0/16 exist. if you have more subnets on the inside network, then you need to let eh ASA know about them eg:-

route inside 192.168.1.0 255.255.255.0 <>

You should also decided if you are going to tunnel all traffic, or split-tunnel.

HTH>

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: