B-ACD problem

Unanswered Question
Aug 4th, 2008
User Badges:

I have B-ACD on CME

BUT

when i call it ,i got fast busy or call terminated.

Also i got the following message:

*Aug 3 14:17:46.879: %IVR-6-APP_INFO: TCL B-ACD: >>> B-ACD Service Started <<<


My conf is:

application

service queue flash:app-b-acd-2.1.0.0.tcl

param queue-len 10

param aa-hunt1 1111

param aa-hunt2 2222

param number-of-hunt-grps 2

!

service aa flash:app-b-acd-aa-2.1.0.0.tcl

param number-of-hunt-grps 2

param handoff-string aa

param dial-by-extension-option 4

param max-time-vm-retry 2

param aa-pilot 9000

param max-extension-length 4

param second-greeting-time 10

param welcome-prompt _bacd_welcome.au

param call-retry-timer 5

param max-time-call-retry 50

param voice-mail 2020

param service-name queue

!

dial-peer voice 3 voip

service aa

incoming called-number 9000

codec g711ulaw


What is the problem?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Chris Deren Mon, 08/04/2008 - 09:43
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

You need to include all parameters under aa service, add these:


paramspace english index 1

paramspace english language en

paramspace english location flash:


Also, ensure you have the files in flash.


HTH,


Chris

youssef.ahmed Mon, 08/04/2008 - 10:02
User Badges:

Thx Chris,

it seems that my eyes cheats me.I should go to sleep ;)


jamesfang98 Wed, 08/27/2008 - 10:25
User Badges:

And, the dial-peer 9000 may not be up.


Try to add these below to your dial-peer:


dial-peer voice 3 voip

service aa

incoming called-number 9000

codec g711ulaw

destination-pattern 9000

session target ipv4:x.x.x.x <-- Your rtr ip


And you can verify this dial-peer status runing this cmd:


# show dial-peer voice summary


B-ACD is quite tricky and took me quite a while to twick it and get it up running. No mature document about it.


I figured out, the keys are: dial-peer need to be up with G711 code, mandatory param parameters need to be there.


Pls rate if help

Actions

This Discussion