cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
820
Views
5
Helpful
4
Replies

Router for Channelized DS3.

mark.jenks
Level 1
Level 1

Right now, I have 2 3662's with channelized T1 cards in them, running about 22 half T1's to the branch offices. I'm looking for a replacement router that can do Channelized DS3, to grow these offices to full T1's. I was looking at the 2851, but should I be looking higher at the 7300's?

4 Replies 4

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Mark,

I don't see a channelized DS3 module not even for C3845

see

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8016a8e8.html

I would go for a C7204VXR that can install channelized Ds3 port-adapter

Use the following as a reference

http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/channelized-t3_dual-wide_install_config/4584ct3d.html

Hope to help

Giuseppe

I thought the 7200 was EOL soon?

What about the 7304?

Hello Mark,

I think it is EOL a 7206VXR with NPE 400 or less processor engine.

There are NPE-G1 and NPE-G2 processor engines and they are used, we have just bought two.

See

http://www.cisco.com/en/US/prod/collateral/routers/ps341/prod_end-of-life_notice0900aecd806b8c96.html

C7304 can be OK I haven't used it but I think it shares the PAs with 7200 so can be fine

Hope to help

Giuseppe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: