Can I get my PIX to redirect IP traffic

Unanswered Question
Aug 4th, 2008

to a router/gateway on my LAN? Basically the PIX is the default gateway for my LAN. I have a router installed by a vendor that is a gateway to the vendor's network. If I add a static route to the PIX it allows the PIX to reach those subnets but the PIX won't redirect any of my PCs to the vendor's router. Any ideas?



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
dhananjoy chowdhury Mon, 08/04/2008 - 21:01

if the router is on the same interface as your LAN, then to redirect IP traffic on tje same interface on ASA, you will have to use IOS 7.2 or later and use the command

same-security-traffic permit intra-interface

DIEGO ALONSO Wed, 08/06/2008 - 10:55

Thank you sir. Now all I gotta do is see if I can get my little 506 PIX with 8/32 to run 7.2.

Again thanks,


DIEGO ALONSO Wed, 08/06/2008 - 15:07

I hadn't a chance to check but I was expecting that to be the case.

Thank you very much for your help.




This Discussion