08-05-2008 09:55 AM - edited 03-06-2019 12:37 AM
What files do I need on a catalyst 6513 to get it to boot?
Here is what is installed..
NAME: "7", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 4.4"
PID: WS-SUP720-3B , VID: , SN: SAL0917A12C
NAME: "msfc sub-module of 7", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 2.3"
PID: WS-SUP720 , VID: , SN: SAL09274RF9
NAME: "switching engine sub-module of 7", DESCR: "WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.1"
PID: WS-F6K-PFC3B , VID: , SN: SAL09169F7M
NAME: "8", DESCR: "WS-SUP720-3B 2 ports Supervisor Engine 720 Rev. 4.4"
PID: WS-SUP720-3B , VID: , SN: SAL09285BWX
NAME: "msfc sub-module of 8", DESCR: "WS-SUP720 MSFC3 Daughterboard Rev. 2.3"
PID: WS-SUP720 , VID: , SN: SAL092859A5
NAME: "switching engine sub-module of 8", DESCR: "WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.1"
PID: WS-F6K-PFC3B , VID: , SN: SAL092753BA
NAME: "9", DESCR: "WS-X6748-GE-TX CEF720 48 port 10/100/1000mb Ethernet Rev. 2.3"
PID: WS-X6748-GE-TX , VID: V01, SN: SAD102105KG
NAME: "switching engine sub-module of 9", DESCR: "WS-F6700-CFC Centralized Forwarding Card Rev. 2.0"
PID: WS-F6700-CFC , VID: , SN: SAD1025028B
NAME: "10", DESCR: "WS-X6748-GE-TX CEF720 48 port 10/100/1000mb Ethernet Rev. 2.3"
PID: WS-X6748-GE-TX , VID: V01, SN: SAD102407LN
NAME: "switching engine sub-module of 10", DESCR: "WS-F6700-CFC Centralized Forwarding Card Rev. 2.0"
PID: WS-F6700-CFC , VID: , SN: SAD102502J3
08-05-2008 10:14 AM
Mike,
Do you plan to use hybrid or native IOS? You can use the software adviser to find out which IOS supports your needs.
http://tools.cisco.com/Support/Fusion/FusionHome.do
Mark
08-05-2008 10:25 AM
Native IOS. Right now I have the following files on compact flash....
s72033-adventerprisek9_wan-mz.122-18.SXF14.bin
and
c6msfc-boot-mz.121-27b.E1.bin
Mike
08-05-2008 10:27 AM
The s72033-adventerprisek9_wan-mz.122-18.SXF14.bin image will be the only image you need.
Mark
08-05-2008 12:13 PM
I don't need a file to boot the sups? like c6msfc-boot-mz.121-27b.E1.bin
Mike
08-05-2008 12:33 PM
Mike,
The IOS is all you need.
08-05-2008 12:52 PM
Thanks....and of course that is not working. Any ideas how I can format CompactFlash while in rommon mode?
Mike
08-05-2008 01:13 PM
Mike,
I don't believe there is a way to format in rommon. Is there an image in bootflash to get it out of rommon. If not it looks like xmodem will be your only option.
Mark
08-05-2008 01:32 PM
No file in bootflash and I am already looking at doing the xmodem upload to bootflash:
Thanks
Mike
08-05-2008 01:55 PM
Mike,
Sorry the format of your compact cards didn't work out for you.
Best of luck,
Mark
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: