We are using an ACS server to authenticate wireless users to active directory this works fine. The issue occurs when we try to pull an ip and we can't fomr the dhcp. The vlan we have the SSID on is vlan 10 and the management vlan of the AP is vlan 500. The ip-helper info is correct because wired users on vlan 10 get an ip immedialty. We just can't pull one with the AP. Does anyone know the config for this? Here is my current config, the client authenticate through the ACS 4.2 but pull no ip, the only way for me to manage the ap is to have the native vlan command on there, once i remove it i can't telnet. What is the fix for this? Thanks
current switch port config ap is plugged into.
switchport trunk encapsulation dot1q
switchport trunk native vlan 500
switchport mode trunk