UK E1 PRI

Answered Question
Aug 5th, 2008
User Badges:
  • Silver, 250 points or more

Hello:

When adding E1 PRI for UK using MGCP what would be the PRI protocol type?


Thanks

Correct Answer by Steellllllllll0 about 8 years 9 months ago

Hi,

I normally use PRI euro and never had any problems so far touch wood...

Correct Answer by Rob Huffman about 8 years 9 months ago

Hi Rajesh,


Hope all is well! You should check with the Service Provider but it may well be;


isdn switch-type primary-net5


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (3 ratings)
Loading.
Correct Answer
Rob Huffman Tue, 08/05/2008 - 17:08
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Rajesh,


Hope all is well! You should check with the Service Provider but it may well be;


isdn switch-type primary-net5


Hope this helps!

Rob

Rajesh Revuru Tue, 08/05/2008 - 17:17
User Badges:
  • Silver, 250 points or more

Rob:


All is good, thanks for the information,

for be the "PRI protocol type" in the CUCM GUI page. Currently have following options and i guess it would be PRI-EURO

1. PRI EURO

2. PRI Australian



Correct Answer
Steellllllllll0 Thu, 08/07/2008 - 00:25
User Badges:

Hi,

I normally use PRI euro and never had any problems so far touch wood...

Rob Huffman Thu, 08/07/2008 - 05:36
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Rajesh,


Sorry for the delay, I missed your reply completely :(


"PRI - EURO" should be just fine as nicely stated by Bruce. (+5 points for your good work here Bruce)


Take care buddy!

Rob

Actions

This Discussion