Can Ap's Joined to a WLC use SNMP

Unanswered Question
Aug 5th, 2008
User Badges:

I have 18 AP's currently joined to my WLC. Code is 5.0.148.0. I have the SNMP string on the WLC but I'm wondering if I can put an SNMP string on the AP's. If so how do I do it. Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Wed, 08/06/2008 - 05:20
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Scott,


Q. Can a LAP AP handle SNMP messages like an IOS AP?


A. The LAP APs cannot handle SNMP messages on their own. In order to handle SNMP messages, you should configure an SNMP community on the WLC to which the LAP is registered. All the AP information is managed by the WLC.



From this good Q & A doc (**at the very end of the doc);


http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a00806a4da3.shtml



From Jake @ Cisco;


http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dde2a24/0#selected_message



Hope this helps!

Rob

Actions

This Discussion

 

 

Trending Topics - Security & Network