Tshi M Wed, 08/06/2008 - 06:14
User Badges:
  • Silver, 250 points or more

access-list 1 permit 10.10.10.10

snmp-server trap-source loopback0

snmp-server community xxxxxx RO 1

snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart


you can add more to the snmp traps

Richard Burts Wed, 08/06/2008 - 07:28
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Olakunle


configuring the access list and the snmp-server community are needed for the SNMP server to poll the router but are not necessarily needed to send traps. The other thing that is necessary to configure is:

snmp-server host


HTH


Rick


Tshi M Wed, 08/06/2008 - 07:31
User Badges:
  • Silver, 250 points or more

Yes, I forgot to add the snmp-server there :-). And yes, the ACL is not needed but I used :-)

Actions

This Discussion