08-06-2008 05:22 AM - edited 03-11-2019 06:26 AM
Hi all..
Im redirecting ftp request for IP address 10.10.10.5 to 192.168.0.5 by entering the following command:
static (DMZ,inside) tcp 10.10.10.5 ftp 192.168.0.5 ftp netmask 255.255.255.255.
Its working fine.
But I need to add 20 diferents ports and redirect them to ftp port.
Do I have to add 20 diferents commands on ASA??? Or is there anyway to do that on a simple command?
Thanks!
Solved! Go to Solution.
08-06-2008 05:39 AM
It's on a port by port basis:-
HTH>
08-06-2008 05:39 AM
It's on a port by port basis:-
HTH>
08-06-2008 05:55 AM
Hi Andrew,
on the link, I just found redirect from one port to one port...
And I want to redirect many ports to only one port...
Can you show me an example?
08-06-2008 05:59 AM
You mis-understand, what you want to do, I think is not possible - you must configure them 1 by 1.
08-06-2008 06:13 AM
Oh...ok...
I really mis-understood...
Anyway...thank you about your clarify...
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: