Problem making ISDN call

Unanswered Question
Aug 6th, 2008
User Badges:

Hi,


I am using ISDN, on initiating the call I am getting following error, it appears like the call is initiated for a while (1 or 2 secs) and then hangs up with message "Normal call clearing".


I appreciate any suggestions, as why this problem is occuring, I turned on debug PPP authentication and negotiation are successfull.


Could this be a telco problem?



Aug 6 08:58:59.037 UTC: ISDN Se1/0:23 Q931: RX <- CONNECT pd = 8 callref = 0x96C4

Aug 6 08:58:59.049 UTC: %DIALER-6-BIND: Interface Se1/0:21 bound to profile Di21

Aug 6 08:58:59.049 UTC: %ISDN-6-CONNECT: Interface Serial1/0:21 is now connected to 0667723420 N/A

Aug 6 08:58:59.053 UTC: ISDN Se1/0:23 Q931: TX -> CONNECT_ACK pd = 8 callref = 0x16C4

Aug 6 08:58:59.213 UTC: ISDN Se1/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x16C4

Cause i = 0x8090 - Normal call clearing

Aug 6 08:58:59.313 UTC: ISDN Se1/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x96C4


Thanks

Yamin

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bmbreer Wed, 08/06/2008 - 07:09
User Badges:

Post the config so we can properly troubleshoot.

Richard Burts Wed, 08/06/2008 - 08:06
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Yamin


I agree that seeing the config might help us to find the issue. I would also suggest that it might be helpful if you would run debug isdn q931 and possibly debug ppp negotiation and post the output of the debug.


HTH


Rick

Actions

This Discussion