Design query : UC - BRI over PRI

Unanswered Question

A customer uses a Lucent PBX and in that he has both a PRI card (connected to the PSTN) and an ISDN BRA (S/T) card which is directly connected to the TE of an endpoint.

The endpoint dials (a data call using both channels) a remote system, as if connected to the PSTN, and the call is automatically routed out of the PBX using 2 channels on the PRI creating an end-to-end data call.

The customer would like to replicate this setup on a new Cisco Communications Manager setup.

The customer has a 2821 Router with a VWIC2-2MFT-T1/E1 (connected to PSTN) and a WIC-1B-S/T-V3 connected to the endpoint. How can we replicate the above requirement on the Cisco voice gateway?

regards

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion