call manager 4.2

Unanswered Question
Aug 6th, 2008
User Badges:

Hi,


I have a CCM 4.2, this device is connected to a normal switch. i connect one ip phone cisco 7650 to this switch. in the ccm admin window i tried to add this phone under device>phones however wen i coneect the phones to the switch it is not able to register with the call manager... this was all working fine yester day i dont know wat happened suddenly.. please help me know how i can get this phone to register with the call manager

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Chris Deren Wed, 08/06/2008 - 11:18
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

First check to see if the phone is getting IP address from the DHCP server and see if it points to the CM TFTP server.

The ping the phone IP address from the CM server to see if it's reachable.

Make sure CM service on CallManager server is running.


Look at the phone display and observe what it is saying.


Chris

Jaime Valencia Wed, 08/06/2008 - 11:59
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

was the phone configured previously or are you using auto-registration??


HTH


java


if this helps, please rate

Actions

This Discussion