CCME on a 2801

johnakeating · ‎08-06-2008

I just go a cisco 2801 and would like to set a small CCME lab.

what will I need to get to make it into a CCME router?

the IOS and PVDM????

Thanks

Marwan ALshawi · ‎08-07-2008

only IOS enough

PVDM used with its DSPs for transcoding MTP and conferenceing resources

if u wanna do like confrenceing

u need DSP resources

each confrence need DSP

but for nromal CME without PVDM u can practce alot of features and u can say most of the features

good luck with ur lab

please, if helful rate

don-sullivan · ‎08-08-2008

Cisco IOS Versions 12.4.15T4 through 12.4.15T6 being the lastest. Use the archive command to place the CCME html files in FLASH:/GUI.

If you only plan to use SCCP Cisco phone or the Cisco IP softphone no PVDM is required. If you plan on using mulitple voice protocols then you'll need it.