08-07-2008 01:55 AM - edited 03-06-2019 12:39 AM
Can I somehow translate VLAN on trunk port? VLAN 55 on one end is VLAN 88 on second end.
08-07-2008 02:02 AM
yes you can translate VLAN number.
But information provided by you is limited.
Hope you get help from this link:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vlans.html#wp1044990
HTH,
regards,
shri!!!
08-07-2008 03:25 AM
trunk port is between 4506 switch and hp blade cisco switch module
08-07-2008 02:08 AM
i would say instead of think about it this way
why u dont make routing between those VLANs inter-vlan routing
08-07-2008 03:24 AM
because intervlan routing does not solve my problem
08-07-2008 06:48 AM
Check on Configuring VLAN Translation on a Trunk Port
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/vlans.html#wp1049814
08-07-2008 03:56 PM
heres a good one use a patch cable between two ports on the different vlans..........
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
