08-07-2008 03:46 AM - edited 03-15-2019 12:28 PM
Hi,
I folled the instructions ('Deploying Dial Plan for 5.0(1) and later releases' to install the latest UK dial plan (dp-ffr.2-1-7.GB.cop) on CUCM 6.1.2.
Show software verifies that the COP file has been installed.
Problem is that it does not show as an option when I try to configure Route Pattern or Route Filter. Only the default North American Numbering Plan is shown from the drop down.
Does anybody know how to fix this issue?
however, it
Solved! Go to Solution.
08-07-2008 03:56 AM
Hi,
You need to install the dial-plan after you have downloaded to callmanager before you can see it.
To do this...Go to CCMADMIN>Call routing>dial-plan installer..Click on find...You will see the UKNP that you downloaded...Click on install....
You should see it after this
08-07-2008 03:56 AM
Hi,
You need to install the dial-plan after you have downloaded to callmanager before you can see it.
To do this...Go to CCMADMIN>Call routing>dial-plan installer..Click on find...You will see the UKNP that you downloaded...Click on install....
You should see it after this
08-07-2008 04:23 AM
Thanks
This has resolved my issue (I restarted CallManager Service.
I can select the UK Dial Plan for Route Filters. This has resolved my issue.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide