LMS - installed, inactive, active ports

Answered Question
Aug 7th, 2008
User Badges:

Hi

I'm a lms-beginner and want to get these Informations from discovered devices


installed ports of all switches / all routers

active/inactive (free) ports of switzches and routers.


there are so many features and I don't know, if I can get the information and where can I get it - need a lot of help in future - thanks - Arne

Correct Answer by Joe Clarke about 8 years 7 months ago

Then you can use the Switch Port reports in Campus Manager to get what you want. Go to Campus Manager > User Tracking > Reports > Report Generator, and select either the Switch Port Capacity Report or the Switch Port Summary report. The latter will tell you all of your current port usage where as the former will show you at what percentage of capacity your devices currently are.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Joe Clarke Thu, 08/07/2008 - 07:09
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

What version of LMS do you have?

Correct Answer
Joe Clarke Thu, 08/07/2008 - 22:55
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Then you can use the Switch Port reports in Campus Manager to get what you want. Go to Campus Manager > User Tracking > Reports > Report Generator, and select either the Switch Port Capacity Report or the Switch Port Summary report. The latter will tell you all of your current port usage where as the former will show you at what percentage of capacity your devices currently are.

Actions

This Discussion