Unanswered Question
Aug 7th, 2008
User Badges:


I have a problem with a VPN L2L between a pix 506 and a ASA 5510. Behind the ASA, I have 6 VLAN, and behind the PIX, 1 network. In order to create the tunnel, I ping (with a server behind the ASA, in the server VLAN for example) a server behind the PIX. But I can't create the tunnel when I ping (with a server behind the pix) an equipment in one VLAN behind the ASA. Do you know why? A problem with a route?

Thank you

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Farrukh Haroon Thu, 08/07/2008 - 11:17
User Badges:
  • Red, 2250 points or more

It could be tons of reasons. Do you mean to say that if tunnel is initiated from the ASA LAN it works, but it DOES NOT when you do so from behind the PIX? Is that the case?

Can you post your configs?




This Discussion