Simple question for a new networker..
When I perform the following command it takes forever to execute.
What could be the possible reasons, I mean it has enough memory and the ios is the same on both machines.. and they are the same model..
Let me know..
Check the size of your running-config file.. if this large the router maybe delay to show..
Directory of nvram:/
110 -rw- 14695 startup-config
111 ---- 27 private-config
1 ---- 12 persistent-data
2 -rw- 0 ifIndex-table
129016 bytes total (112194 bytes free)
check the cpu utilization
router# sh processes cpu history
(please rate helpful posts)