08-07-2008 07:23 PM - edited 03-10-2019 04:14 AM
Hi all how can i obtain Signature Updates for AIP-SSM 10 where i am having 60 day trial license with me
08-08-2008 09:48 AM
Here is the main file download page for the IPS sensors.
Find the section for the version you are running and click on the Latest Signature Updates link to take to you to the download page for signature updates.
You can then download which ever signature update you want.
NOTE1: Each Signature Updates contains all signatures from previous Sig levels. So you only need to download the latest one.
NOTE2: Each signature update has a specific E (Engine) level requirement. You can execute "show ver" on your sensor to determine if it is at an E1 or E2 level. If it is at E1 and you want the latest sigs that require E2 then you will first need to install the E2 upgrade.
On that main download page look for the "Latest Upgrades" link for your version, and look for the IPS-engine-E2-req-X.X-X.pkg file where the X.X-X matches your sensor version.
If there is not an X.X-X matching your sensor version, then you may need to upgrade the software version for your sensor as well.
NOTE3: Many of these links will also require an account on cisco.com. And for some of these files that account may also need to be verified for being from a country where the USA's export restrictions allow downloads for encryption. (Most countries qualify but you do have to go through that qualification step). It has been over 10 years that I have had do this so I am not sure of the latest procedures for getting an account or validating it for encrpytion downloads.
08-08-2008 07:23 PM
Hi sorry i am not able to find the link posted by you
08-11-2008 10:07 AM
Sorry about that.
Here is the main download page link:
http://www.cisco.com/kobayashi/sw-center/ciscosecure/ids/crypto/index.shtml
08-12-2008 02:15 AM
Hi marcbal i tried with the link u provided,but it required high level access than the privileage i have now.
Thanks for the reply
08-12-2008 08:06 AM
You need to get your cisco username qualified for crypto access.
Unfortunately I can't remember how to do it (it has been over 10 years since I had to).
In the mean time here is the direct link for signature updates. You might be able to get to this link:
08-12-2008 11:26 AM
Which version are you running on the AIP?
Regards
Farrukh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide