Collin Clark Fri, 08/08/2008 - 05:45
User Badges:
  • Purple, 4500 points or more

Will you have VM's on different networks? Does your server NIC support dot1q trunking?

Collin Clark Fri, 08/08/2008 - 05:51
User Badges:
  • Purple, 4500 points or more

You can configure the NIC like any other port then.


interface GigabitEthernet10/23

description VM Server

switchport

switchport access vlan 110

switchport mode access

speed 1000

duplex full

spanning-tree portfast

spanning-tree bpduguard enable



Hope that helps

gandhi.ganesh Fri, 08/08/2008 - 05:54
User Badges:

This is fine,

but i don't want two vm servers talk to each other even when they are in same subnet.

Collin Clark Fri, 08/08/2008 - 06:04
User Badges:
  • Purple, 4500 points or more

OK- how was I supposed to know that initially? You never stated it.


AFAIK there is not way to control that. The VM Server has it's own internal switch that the VM's connect to (logically). The uplink of that switch is the physical link to your network. If you want one of the isolated, you'll have to add another NIC, set the VM to use it, the configure the switch for PVLAN.


Actions

This Discussion