08-08-2008 01:02 AM - edited 07-03-2021 04:18 PM
Hello,
we have one 4402 wireless controller thats run about 15 Lightweight APs.
Is it possible to descide which APs that should have which Wlans? if it is, then how?
Grateful for any help!
Kristoffer
Solved! Go to Solution.
08-08-2008 01:22 AM
Hi Kris,
Yes it is very well possible using WLAN Override feature.
This link will clearly guide you how to achieve the same
http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/c42wlan.html#wp1127323
Incase you have any doubts please come back with the same.
HTH
Ankur
*Pls rate all helpful post
08-08-2008 01:22 AM
Hi Kris,
Yes it is very well possible using WLAN Override feature.
This link will clearly guide you how to achieve the same
http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/c42wlan.html#wp1127323
Incase you have any doubts please come back with the same.
HTH
Ankur
*Pls rate all helpful post
08-21-2008 10:43 PM
Thank you, that document said it all!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: