verify flash: on C3750.. file not found

Unanswered Question
Aug 8th, 2008
User Badges:

Why I can't verify IOS bin file saved in a subfolder on the flash!


verify flash:c3750-ipbasek9-mz.122-44.SE2/c3750-ipbasek9-mz.122-44.SE2.bin"


%Error verifying flash... (No such file or directory)


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
vijayasankar Fri, 08/08/2008 - 03:55
User Badges:
  • Silver, 250 points or more

Hi,


It looks like some typo in the command.

the command should mostly look like

"verify flash:c3750-ipbasek9-mz.122-44.SE2.bin"


Check this out.


-VJ


lcolimoro Fri, 08/08/2008 - 04:40
User Badges:

I tried already all the combinations!

I also tried it to run on different 3750 switches and I had the same unsuccessfully results. It seems the "verify" is unable to read an image file under a subfolder!

vijayasankar Fri, 08/08/2008 - 06:15
User Badges:
  • Silver, 250 points or more

Hi,


Try this..

1) issue the cd command to switch to the directory you want

cd "directoryname:


2) Execute the verify command with the file name.

verify "filename"


Alternatively you can try this alsow


verify flash:/directoryname/filename

Have a note of the slash "/".

In your case it should be as follows


verify flash:/c3750-ipbasek9-mz.122-44.SE2/c3750-ipbasek9-mz.122-44.SE2.bin


This should work.

Test this and let us know the result. Both method works for me.


HTH

-VJ



lcolimoro Sun, 08/10/2008 - 21:44
User Badges:

Hi,

I still don't get verifiy worked on the ones that have been upgraded to c3750-ipbasek9-mz.122-44.SE2.bin

See the attached file!

I have several c3750 and the verify works on the ones running ipbase-mz.122-25.SEE2.

Is it a bug of 122-44-SE2 version?

Thanks



Attachment: 
lcolimoro Mon, 08/11/2008 - 21:32
User Badges:

I have few switches in the stack. The ones I tested are not configured as stack.

I have tried additional test while I'm writing this email and it seems the problem only occurrs with the 3750s running /c3750-ipbasek9-mz.122-44.SE2 as IOS image.

I tried some other which are not yet updated with latest IOS and the verify command works fine!

It must be a bug for that IOS version!


prasetiohadi Thu, 12/05/2013 - 16:12
User Badges:

Hi, I got the same problem, and I try to put extra parameter  /md5

example :

verify /md5 flash:/c3750-ipbasek9-mz.122-44.SE2/c3750-ipbasek9-mz.122-44.SE2.bin


and it's work for me.

Jean Matthew Thu, 12/22/2011 - 03:16
User Badges:

Hi, getting the same error message with c3750-ipbasek9-mz.122-53.SE1.bin


Cisco#verify flash:c3750-ipbasek9-mz.122-53.SE1.bin

File system hash verification failed for file flash:c3750-ipbasek9-mz.122-53.SE1.bin(No such file or directory).


After getting MD5 hash value for that IOS (http://www.cisco.com/cisco/software/cart.html?mdfid=&treeMdfId=268438038&flowid=null&addoption=DN&imageGuId=717943AADCA8210CC4125BFAF81514BC75E2C617&isLatestRel=)


I can now succesfully proceed with


Cisco#verify /md5 flash:c3750-ipbasek9-mz.122-53.SE1.bin 7fd986e52367ca1153d6103edf8bd4ed

..................................................................................................................................

...................................................................................................................................

..................................................................................................................................

................................................................................Done!


Verified (flash:c3750-ipbasek9-mz.122-53.SE1.bin) = 7fd986e52367ca1153d6103edf8bd4ed


That's all

Actions

This Discussion