08-08-2008 10:37 AM - edited 03-11-2019 06:28 AM
i have 10 locations with pix 501's and a VPN tunnel built to my main network witch is at a data-center. my main network at he data-center has a pix 506E
is there any way to tell how much bandwidth each location is eatting up?
08-11-2008 02:00 AM
Hi,
No, the PIX will not allow you to set that up (at least not the 6.x IOS).
You can use device like PacketShaper to shape the traffic, or you can use a SNMP server to get the info from the PIX a build the statistics.
Please rate if this helped.
Regards,
Daniel
08-11-2008 05:01 AM
i am assuming u use pix 7.x
in this case u can achive it by useing policing and matcing based on the configured vpn tunnle groups
and the fpllowing link useful
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml
please, if helful rate
08-11-2008 10:48 PM
Hi,
PIX 506E does not support 7.x IOS
Cheers,
Daniel
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: