Adding ASA5540 v7.0(7) to CSM 3.2 (pro)

Unanswered Question
Aug 8th, 2008

Cisco Security Manager 3.2 SP2

ASA5540 V7.0(7) single context, routed mode

Using the Device View to add an ASA, enter address, name and credentials and recieve error messge "unable to connect to the device. Device connectivity test between the device and CSM failed.."

I am succesfully able to ssh to the device from the same mgmt network.

With logging enabled I can see the ssh connection but do not see anything comming from CSM.

sample config below:

aaa authentication ssh console LOCAL

aaa authentication http console LOCAL

http server enable

http mgmt

http mgmt

http redirect mgmt 80

snmp-server host mgmt community nnnnn

Many thanks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
frekes Mon, 08/11/2008 - 05:47

Problem resolved. Appeared to be an issue with local IP connectivity, which is now resolved.

succesfully able to add ASA as device into CSM.




This Discussion