1250 patched into 6500 CatOS switches

Unanswered Question
Aug 9th, 2008
User Badges:

Guys does anyone know of any issues with the 1250 access point being patched into 6500 CatOS switches


When patching the the 1250's in, I noticed that it was showing a 'NotConnect' state.


I then disabled, enabled it, and it came back, and after a certain time they become disconnected.


I tried this against a couple of ports that didn't come up OK, and they did exactly the same thing.


Is there some sort of known problem with these APs and Cat switches running CatOS? There are no errors clocked against the ports…


Please see attached details



Many Thanks,



Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Sat, 08/09/2008 - 07:22
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Here are the requirements for 1250's on the 6500 and some other notes... CatOS isn't supported.


Linecards:

WS-X6148A-GE-45AF

WS-X6148-GE-45AF

WS-X6548-GE-45AF

PoE daughter cards:

WS-F6K-48-AF=

WS-F6K-GE48-AF=


Software Release:

12.2(33)SXH2

March 31


Notes:

Supports 2 radio 11n mode

Recommend 1:1 replacement of 802.11a/b/g to 802.11n

No limitations on the number of AP1250s that can be used with a card or chassis

Chassis power supply must be correctly sized for PoE load


Scott Fella Sat, 08/09/2008 - 11:14
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

It shouldn't matter.... If you are using the correct power injectors, then the 1252 should power up fine.

krishanmistry Sun, 08/10/2008 - 01:13
User Badges:

The problem I have is that we have 1250 APs that are powered by air-pwrinj4, the power injectors are patched into the Cat switch and are showing as not connected, are we still saying the 1250 are not supported on Cat switches.


I have patched the same AP and Pwr inj into a 3750 and the AP shows connected and is stable.


does this point to your initial comment that the 1250's are not supported on Cat switches


Many Thanks

Scott Fella Sun, 08/10/2008 - 06:05
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Is the port negotiating correctly? The CatOS isn't supported to power up the 1252. I don't see why it wouldn't work if you have a power injector. Do you have an AC plug to power the 1252.... just to see if it can be the injector and the switch not negotiating?

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode