08-10-2008 03:18 PM - edited 03-15-2019 12:31 PM
I'm testing b-acd through a gatekeeper and came across something weird. Call flow is:
CME1----gatekeeper-----CME2(b-acd script)
When I put a call into the BACD script, an extra call shows up on the gatekeeper. Here's the output:
router#sh gatek calls
Total number of active calls = 2.
GATEKEEPER CALL INFO
====================
LocalCallID Age(secs) BW
31-206 8 16(Kbps)
Endpt(s): Alias E.164Addr
src EP: CME1 7777
CallSignalAddr Port RASSignalAddr Port
172.16.1.20 49645 172.16.1.20 49644
Endpt(s): Alias E.164Addr
dst EP: CME2 5#4000
CallSignalAddr Port RASSignalAddr Port
172.16.2.20 1720 172.16.2.20 56608
LocalCallID Age(secs) BW
32-206 8 128(Kbps)
Endpt(s): Alias E.164Addr
src EP: 7777
Endpt(s): Alias E.164Addr
dst EP: CME2 4000
CallSignalAddr Port RASSignalAddr Port
172.16.2.20 1720 172.16.2.20 56608
router#
Even if I put a call into the BACD script from a phone on CME2, I still get a call on the gatekeeper.
Has anyone seen this before?
08-10-2008 10:43 PM
Hi,
Have you disabled any h.450 sup services on your cme configs?
Cheers,
08-11-2008 06:42 AM
Yea, tried disabling h450.2 and 3. Didn't reboot the router after though. I'll try rebooting later tonight and let you know.
08-11-2008 02:02 PM
No dice. Still get an active call on the gatekeeper. Chalk this up to "WTF?" I guess.
08-11-2008 02:35 PM
Interesting, I'm happy to review your config if you want to email it to me.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide