08-10-2008 03:23 PM - edited 03-06-2019 12:42 AM
Hi Experts,
I just found the below log messages from one of my 3560s but I couldn't identify the time format like what. When typing #sh clock its showing normal format.
What and how would be the time format config.
Can anybody please suggest on this.
3w2d: %LINK-3-UPDOWN: Interface FastEthernet0/10, changed state to down
3w2d: %LINK-3-UPDOWN: Interface FastEthernet0/10, changed state to up
3w2d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up
3w2d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to down
3w2d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up
3w3d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to down
3w3d: %LINK-3-UPDOWN: Interface FastEthernet0/10, changed state to down
3w3d: %LINK-3-UPDOWN: Interface FastEthernet0/10, changed state to up
3w3d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up
3w3d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to down
3w3d: %LINK-3-UPDOWN: Interface FastEthernet0/10, changed state to down
3w3d: %LINK-3-UPDOWN: Interface FastEthernet0/10, changed state to up
3w3d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up
3w3d: %ILPOWER-7-DETECT: Interface Fa0/10: Power Device detected: IEEE PD
3w3d: %ILPOWER-5-POWER_GRANTED: Interface Fa0/10: Power granted
3w3d: %ILPOWER-5-IEEE_DISCONNECT: Interface Fa0/10: PD removed
3w3d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to down
3w3d: %LINK-3-UPDOWN: Interface FastEthernet0/10, changed state to down
3w3d: %LINK-3-UPDOWN: Interface FastEthernet0/10, changed state to up
3w3d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up
3w3d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to down
3w3d: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up
3w4d: %CLEAR-5-COUNTERS: Clear counter on all interfaces by initial on vty0 (206.116.76.140)
Switch#sh clock
19:17:25.540 EST Sun Aug 10 2008
Regards,
Naidu :-)
08-10-2008 03:32 PM
Naidu,
You should set your logging to the date instead of uptime. Here is the command to set your logging to the local time to the switch.
config t
service timestamps log datetime msec localtime show-timezone
HTH,
Mark
08-10-2008 04:06 PM
Hi Mark,
Thanks for the help.
I got understand and will implement it.
Regards,
Naidu.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide