How to Install the ASA5510 IOS sowftware

Answered Question
Aug 10th, 2008
User Badges:

Hi,


i loss the Cisco ASA 5510 IOS software, may i know the procedure to install back again the IOS software.


Thanks A lot.

-Gilbert

Correct Answer by Marwan ALshawi about 8 years 9 months ago

on the r mon

u need to put one of ur ethernet of the firewall connected with a PC that contain TFTP service runing

and make the PC and the firewall interface in the same subnet and give then IPs

inn the rmon

define the TFTP as the PC address and give the firewall address and also define the path with image name


just follow the following link

http://www.cisco.com/en/US/ts/fn/620/fn62378.html


good luck


please, if helpful Rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
gilbertthor Sun, 08/10/2008 - 22:24
User Badges:

Hi,


How about if my ASA no more image file, when boot up it will direct go to rommon.


thks


-Gilbert

Correct Answer
Marwan ALshawi Sun, 08/10/2008 - 23:43
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

on the r mon

u need to put one of ur ethernet of the firewall connected with a PC that contain TFTP service runing

and make the PC and the firewall interface in the same subnet and give then IPs

inn the rmon

define the TFTP as the PC address and give the firewall address and also define the path with image name


just follow the following link

http://www.cisco.com/en/US/ts/fn/620/fn62378.html


good luck


please, if helpful Rate

Actions

This Discussion