cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2861
Views
0
Helpful
4
Replies

How to Install the ASA5510 IOS sowftware

gilbertthor
Level 1
Level 1

Hi,

i loss the Cisco ASA 5510 IOS software, may i know the procedure to install back again the IOS software.

Thanks A lot.

-Gilbert

1 Accepted Solution

Accepted Solutions

on the r mon

u need to put one of ur ethernet of the firewall connected with a PC that contain TFTP service runing

and make the PC and the firewall interface in the same subnet and give then IPs

inn the rmon

define the TFTP as the PC address and give the firewall address and also define the path with image name

just follow the following link

http://www.cisco.com/en/US/ts/fn/620/fn62378.html

good luck

please, if helpful Rate

View solution in original post

4 Replies 4

JORGE RODRIGUEZ
Level 10
Level 10

Here is basic procedure via ASDM or CLI

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008067e9f9.shtml

HTH

Jorge

Jorge Rodriguez

Hi,

How about if my ASA no more image file, when boot up it will direct go to rommon.

thks

-Gilbert

on the r mon

u need to put one of ur ethernet of the firewall connected with a PC that contain TFTP service runing

and make the PC and the firewall interface in the same subnet and give then IPs

inn the rmon

define the TFTP as the PC address and give the firewall address and also define the path with image name

just follow the following link

http://www.cisco.com/en/US/ts/fn/620/fn62378.html

good luck

please, if helpful Rate

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: