ACE DSR (Direct Server Return) Questions.

Answered Question
Aug 11th, 2008
User Badges:

I currently have an ACE 4710 configured for DSR. However, I am at a loss as to how I should configure the loopback (or virtual interface) for the servers. Easy to do in Linux, but not so much on a Windows Server 2000 box.


Any ideas or guides would be appreciated.

Correct Answer by agiaccone about 8 years 9 months ago

Hi, Syed is right, you can find further information on this configuration (Asymmetric Server Normalization) here :

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/slb/guide/rsfarms.html


or here for further considerations :

http://snippets101.blogspot.com/2008/08/asymmetric-server-normalization-on.html


Hope this helps,

Alberto

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
agiaccone Wed, 08/13/2008 - 03:12
User Badges:
  • Bronze, 100 points or more

Hi, Syed is right, you can find further information on this configuration (Asymmetric Server Normalization) here :

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/slb/guide/rsfarms.html


or here for further considerations :

http://snippets101.blogspot.com/2008/08/asymmetric-server-normalization-on.html


Hope this helps,

Alberto

Actions

This Discussion