08-11-2008 03:21 PM
I currently have an ACE 4710 configured for DSR. However, I am at a loss as to how I should configure the loopback (or virtual interface) for the servers. Easy to do in Linux, but not so much on a Windows Server 2000 box.
Any ideas or guides would be appreciated.
Solved! Go to Solution.
08-13-2008 03:12 AM
Hi, Syed is right, you can find further information on this configuration (Asymmetric Server Normalization) here :
or here for further considerations :
http://snippets101.blogspot.com/2008/08/asymmetric-server-normalization-on.html
Hope this helps,
Alberto
08-11-2008 04:36 PM
First create virtual adapter on the server(s). (http://support.microsoft.com/kb/236869) then assign VIP address as the loopback IP address.
Make sure that Real's default gateway is not ACE.
Syed
08-13-2008 03:12 AM
Hi, Syed is right, you can find further information on this configuration (Asymmetric Server Normalization) here :
or here for further considerations :
http://snippets101.blogspot.com/2008/08/asymmetric-server-normalization-on.html
Hope this helps,
Alberto
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: