WS-X6148-GE-TX Private Vlan vs Trunk

Unanswered Question
Aug 12th, 2008

Hi,

I've configured private vlan on a few port on the 6500 with the WS-X6148-GE-TX module. Everything is working fine until i configure trunk port to some of the available interface. The interface is not up but on the other end, it's up.

This is the configuration:-

interface GigabitEthernet2/6

switchport

switchport trunk allowed vlan 20,50

switchport mode trunk

no ip address

no logging event link-status

spanning-tree guard root

!

interface GigabitEthernet2/7

switchport

switchport trunk allowed vlan 20,50

switchport mode trunk

no ip address

no logging event link-status

spanning-tree guard root

!

interface GigabitEthernet2/8

switchport

switchport private-vlan host-association 20 21

switchport mode private-vlan host

no ip address

no logging event link-status

!

interface GigabitEthernet2/9

switchport

switchport private-vlan host-association 20 21

switchport mode private-vlan host

no ip address

no logging event link-status

Is it because of the ASIC port limitation issue?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion