08-12-2008 09:44 AM - edited 03-06-2019 12:45 AM
Hi,
I am running into a problem where I have created 2 separate VLANS, and would like to have communication for some device to communicate with other devices in other VLAN on a single 3750 switch.
Here is what I've done
created VLAN 10 and 20
SVI VLAN 10 with IP 10.10.10.1 255.255.255.0
SVI VLAN 20 with IP 100.10.10.1 255.255.255.0
Ip routing enabled
Device A in VLAN 10
GW 10.10.10.1 /24
IP 10.10.10.100 /24
Device B in VLAN 20
GW 100.10.10.1 /24
IP 100.10.10.100 /24
Now, Device A and Device B are able to ping the SVI VLAN 10 or VLAN 20's IP, the problem is I am not able to ping from Device A to Device B or from Device B to Device A. Any thoughts? Thank you!
Solved! Go to Solution.
08-12-2008 09:57 AM
Are you able to ping from the switch to those computers? Make sure computer's firewall is not blocking you from doing a simple ping.
08-12-2008 09:56 AM
Hello,
chech if you configured it like this:
In the moment I see not really a problem in your notes.
Sebastian
08-12-2008 09:57 AM
Are you able to ping from the switch to those computers? Make sure computer's firewall is not blocking you from doing a simple ping.
08-12-2008 10:06 AM
Thank you Gary, after disabled the firewalls from both devices, they are now pingable. Thank you very much for your help!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: