08-12-2008 09:58 AM - edited 03-03-2019 11:07 PM
HI,
My switch keeps telling me that the software image for WS-X6182-2PA is not bundled in the image.
What does this mean and what can I do about it?
08-12-2008 10:39 AM
What are you running for the IOS on the switch?
Below is the minimum required IOS for the 65xx/76xx
Minimum Software Release
Cisco IOS® Software Release 12.1(8)E
08-12-2008 10:47 AM
I have just installed:
s3223-adventerprisek9_wan-mz.122-33.SXH2a.bin
its still telling me that there are issues. the card is staying powered down
08-12-2008 11:10 AM
Supervisor Engine 32 Restrictions
â¢Supervisor Engine 32 requires a high-capacity fan tray (see the "Fan Trays" section).
â¢In some chassis, Supervisor Engine 32 requires a high-capacity power supply (see the "Power Supplies" section).
â¢Supervisor Engine 32 does not support this hardware:
-WS-F6K-PFC3A Policy Feature Card 3A (PFC3A)
-WS-F6K-PFC3BXL Policy Feature Card 3BXL (PFC3BXL)
-DFCs (installed DFCs do not power up with a Supervisor Engine 32)
-Switch Fabric Modules
-These switching modules:
-WS-X6704-10GE 4-port 10-Gigabit Ethernet XENPAK
-WS-X6748-SFP 48-port Gigabit Ethernet SFP
-WS-X6724-SFP 24-port Gigabit Ethernet SFP
-WS-X6816-GBIC 16-port Gigabit Ethernet GBIC
-WS-X6748-GE-TX 48-port 10/100/1000 RJ-45
-7600-SIP-600 SPA Interface Processor-600
-Optical Services Modules (OSMs)
-WS-X6182-2PA FlexWAN Module (the WS-X6582-2PA Enhanced FlexWAN Module is supported)
-CISCO7603 3-slot chassis
That is from this link
So sorry i guess it is not supported.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: