08-12-2008 09:58 AM - edited 03-03-2019 11:07 PM
HI,
My switch keeps telling me that the software image for WS-X6182-2PA is not bundled in the image.
What does this mean and what can I do about it?
08-12-2008 10:39 AM
What are you running for the IOS on the switch?
Below is the minimum required IOS for the 65xx/76xx
Minimum Software Release
Cisco IOS® Software Release 12.1(8)E
08-12-2008 10:47 AM
I have just installed:
s3223-adventerprisek9_wan-mz.122-33.SXH2a.bin
its still telling me that there are issues. the card is staying powered down
08-12-2008 11:10 AM
Supervisor Engine 32 Restrictions
â¢Supervisor Engine 32 requires a high-capacity fan tray (see the "Fan Trays" section).
â¢In some chassis, Supervisor Engine 32 requires a high-capacity power supply (see the "Power Supplies" section).
â¢Supervisor Engine 32 does not support this hardware:
-WS-F6K-PFC3A Policy Feature Card 3A (PFC3A)
-WS-F6K-PFC3BXL Policy Feature Card 3BXL (PFC3BXL)
-DFCs (installed DFCs do not power up with a Supervisor Engine 32)
-Switch Fabric Modules
-These switching modules:
-WS-X6704-10GE 4-port 10-Gigabit Ethernet XENPAK
-WS-X6748-SFP 48-port Gigabit Ethernet SFP
-WS-X6724-SFP 24-port Gigabit Ethernet SFP
-WS-X6816-GBIC 16-port Gigabit Ethernet GBIC
-WS-X6748-GE-TX 48-port 10/100/1000 RJ-45
-7600-SIP-600 SPA Interface Processor-600
-Optical Services Modules (OSMs)
-WS-X6182-2PA FlexWAN Module (the WS-X6582-2PA Enhanced FlexWAN Module is supported)
-CISCO7603 3-slot chassis
That is from this link
So sorry i guess it is not supported.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide