VPN Client not responding

Unanswered Question
Aug 12th, 2008
User Badges:

Hi,


I have configured an easy vpn. The 2811 router is my vpn server while the clients have vpn clients 4.8.02.0010 installed on their pc. Each time the clients tries to connect, my vpn server doesn`t respond, that response I get from the vpn clients.


I have attached my configs on the vpn server for anyone who has configured this before to please help me look into it and let me know where I got it wrong, i.e. the configs I omitted or the one I should not include, your suggestion and comments will be deeply appreciated.


Thanks in advance.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Marwan ALshawi Tue, 08/12/2008 - 17:01
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

first u need to change the following

do:

crypto isakmp policy 1

encry 3des

hash sha

authentication pre-share

group 2


interface FastEthernet0/1

no crypto map SDM_CMAP_2


crypto map SDM_CMAP_1


then u need to make changes to ur nating


no ip local pool xxxvpnpool 192.168.3.50 172.16.3.70


ip local pool xxxvpnpool 192.168.3.50 172.16.3.70


no ip nat inside source list 1 pool xxxxxxx overload




access-list 110 deny ip 172.16.3.0 0.0.0.255 192.168.3.0 0.0.0.255

access-list 110 permit ip 172.16.3.0 0.0.0.255 any



ip nat inside source list 110 pool xxxxxxx overload


also creat at least one username and password

like

username user1 password 12345


good luck


please, if helpful rate


then should work fine




Actions

This Discussion