08-13-2008 02:32 AM - edited 03-15-2019 12:35 PM
Hi,
I've got a 2821 with 5 BRI and 4 fax on this EVM-8FXS modules. (EVM-HD-8FXS/DID)
I've configured the gateway in call manager.
Everything is going well with the IP Phones.
The fax could send faxes outside and between them but they can't receive faxes...
I've got a busy tone :
Here is a rejected call :
Aug 13 10:26:04.918: ISDN BR0/1/1 Q931: RX <- SETUP pd = 8 callref = 0x01
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Exclusive, B1
Calling Party Number i = 0x0183, '0033625672382'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x81, '350'
Plan:ISDN, Type:Unknown
Aug 13 10:26:04.946: ISDN BR0/1/1 Q931: TX -> CALL_PROC pd = 8 callref = 0x81
Channel ID i = 0x89
Exclusive, B1
Aug 13 10:26:04.962: ISDN BR0/1/1 Q931: TX -> DISCONNECT pd = 8 callref = 0x81
Cause i = 0x80A9 - Temporary failure
Help will be greatly appreciated...
Regards
Charles
08-13-2008 02:50 AM
08-13-2008 03:36 AM
I have done some tests with a phone connected to the fxs port (to avoid fax problems)...
From one IP Phone I could dial, from another one I can't. There is no partition or CSS configured...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide