08-13-2008 05:08 AM - edited 03-15-2019 12:35 PM
I have got the VG224 and the CUCM6.1.1, i want the basic configuration on the VG224, and how do i integrate this with the CUCM. if it is gateway how it will be as a MGCP or SCCP and what will be the configuration on the VG....
Please help on this i will be greatful to you.......
Thanks & Regards
Lal Mohammad
08-13-2008 05:34 AM
check the following link
which contain group of helpful links
good luck
if helpful rate
08-13-2008 05:39 AM
Hi,
I have already gone through all those links but it does not talk about the integration wiht the CUCM, and there is no configuration for the VG224.
08-13-2008 05:43 AM
u can configure it as any cisco voice gate way
make the lan interface access port but put it in the vlan number that is voice vlan in ur network
and u can configure it like noraml h323 or ngcp gateway
and define it in the cucm or ccm as a gateway
then included it in ur dial plan through route pattrens route groups and so on
good luck
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: