08-13-2008 10:46 AM - edited 03-14-2019 02:42 AM
We have an ICM 6.0 HDS and need to have more than the maximum capacity available with total of 6 MCS 72GB drives set up in RAID.
We have 300GB HP hard drives. What is our best option to use these HP drives to increase capacity?
08-19-2008 01:43 PM
I think following guide will help you .
Cisco ICM Enterprise Edition Release 6.0(0) Pre-installation Planning Guide
08-20-2008 04:55 PM
I take it you have an older MCS running Ultra SCSI drives? DL380 G3 or G4?
Generally speaking the array should be configured as:
- OS & Apps - 2 drives in a mirrored (RAID 1).
- DB Data - 4 drives in a mirrored + striped array (RAID 10).
You should aim for 15K drives for all arrays for maximum performance, but 10K will work - but there can be a performance impact.
C.
08-22-2008 06:11 AM
Thank you for your reply.
The server is set up the way you have suggested.
I need to replace 2 of the existing 72GB drives with the 300GB drives.
How do I go about this and has anyone done this before?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide