Requirements: Site to site VPN

Unanswered Question
Aug 14th, 2008

Hi Security Guru's,

It's my first time to implement this. But before doing that i want to have a clear understanding on what i need and what to do. I have here 2 asa 5505 and will be put into 2 sites. Site A and Site B. We want to run both site to site and remote-access vpn. First phase would be site to site. Will these products support my design ? Like how many connections they can handle, limitations etc.

Phase 1

Site A --- Internet--- Site B

Phase 2 Remote access

Site A--Internet mobile client--internet--- Site B

Phase 3 Run application like voip and ftp, email and web browsing.


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Marwan ALshawi Thu, 08/14/2008 - 01:13

ASA 5505

VPN Peers with Base license 10 Concurrent

Connections 10,000

Security Plus license 25Concurrent

Connections 25,000

and the following link enogh to configure site to site and then add remote access users with step by step configurations and details

very helpful

good luck

please, if helpful rate

ninjakid_cisco Thu, 08/14/2008 - 01:30


Is it possible to use both site-to-site and remote-access on one device ?

On site to site :

Can my user connected to the tunnel still browse the internet ?


Marwan ALshawi Thu, 08/14/2008 - 02:56

hi there

as i mentioned the link i have given to u includ how to make all the questions u have asked

L2L and remote access at the same time

and Yes u can let the vpn client connect to vpn and browse the internet at the same time

u need to see this in the link aswel this feature called SPLIT TUNNELING

in this feature u just let the client send the traffic to ur LAN spesified by ACL through the vpn tunnel anything else will go thorgh his/her local setting on the PC such as internet

good luck

if u need any more details just post here

please, if helpful rate


This Discussion