VLAN puzzle

Unanswered Question
Aug 14th, 2008

Hi All


Something strange that needs explaining. I configured an interface to a particular vlan 10 and it does not work but i change the vlan and it works.


I change the blade, the switch and still the same issue. As long as I put it in vlan 10, it will not work but put it in vlan 11 or 12 or any other vlan, it will work. What can be going wrong?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
smothuku Thu, 08/14/2008 - 01:28

Hi ,


Did you create Vlan 10 on the switch.Anything is connected in Vlan 10.


After creating Vlan 10 , you need to assign it to any port so that you can pulgin eitrher PC or Server in that Vlan.


As soon as you create vlan , it willn't comeup until unless something is placed in that Vlan.



Can you paste the "show run" of the switch.


Thanks,

satish

qwertys21 Thu, 08/14/2008 - 01:36

Thanks. There are a lot ofm devices already in vlan 10.


There are devices in all the vlans.


Thanks

smothuku Thu, 08/14/2008 - 01:38

Hi ,


Can you paste "show vlan " output.

What is the model of the switch.


Txs,

Satish

qwertys21 Fri, 08/15/2008 - 04:38

Thanks. I think the network was just being quirky. I came in the next day and all was fine. Strange. Thanks for your help. REally appreciate it. Cheers

Actions

This Discussion