ADSL Configuration

Unanswered Question
Aug 14th, 2008

HI

I am having ADSL line which is provided my BT ( ISP ). I have connected the that Line to ADSL card from router and then I have configured the below. But the link us not coming up please any one help me out please .

onfig t

interface ATM0

description : ADSL Link to BT ISP

no ip address

no ip mroute-cache

atm vc-per-vp 64

no atm ilmi-keepalive

pvc 8/35

pppoe-client dial-pool-number 1

dsl operating-mode auto

interface Dialer0

ip address *.*.*.*.*

encapsulation ppp

dialer pool 1

dialer-group 1

ppp authentication chap pap callin

ppp chap hostname ********

ppp chap password *******

ppp pap sent-username ******* password *******

exit

ip route 0.0.0.0 0.0.0.0 Dialer0

But I didn't enable the VPDN.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
mike.fritzsche Thu, 08/14/2008 - 03:52

Hi,

there is no interesting traffic defined

(dialer-list 1 protocol ip permit ...)

Hope this helps.

Mike

thiru.vel10 Thu, 08/21/2008 - 22:11

HI AllI have configured the ADSL PPPoA in cisco router . I got the PVC from ISP and i configured .

Actions

This Discussion