Good day!
I would like to seek advices regarding to Cisco Firewall Module [WS-SVC-FWM-1] and IPv6 network.
At this moment, our server farm is capable to support IPv4/IPv6 network, and our servers are starting to use both to serve our end-users.
My questions are:
1. Does Cisco Firewall Module [WS-SVC-FWM-1] supporting IPv6 network?
2. If not supported, is there any alternative to filter inbound/outbound IPv6 traffic to our server farm?
=============
# show version
FWSM Firewall Version 2.3(3)
FWSM Device Manager Version 4.1(3)
Compiled on Mon 10-Oct-05 14:50 by dalecki
MMU-FWSM up 1 year 179 days
Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash 04-29-05STI Flash 7.2.0 @ 0xc321, 20MB
0: gb-ethernet0: irq 5
1: gb-ethernet1: irq 7
2: ethernet0: irq 11
Licensed Features:
Failover: Enabled
VPN-DES: Enabled
VPN-3DES: Enabled
Maximum Interfaces: 256
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Throughput: Unlimited
ISAKMP peers: Unlimited
Security Contexts: 2
This machine has an Unrestricted (UR) license.
Serial Number: XXXXXXXXXXX
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
Configuration last modified by enable_15 at 14:28:51 Aug 13 2008
=================
