08-14-2008 09:29 AM
I have 5 device RME 4.0.6 unable collect the inventory, I did remove/ add more than 3 time but still not inventory collected for those 5 devices. I have attached IC-log out put. any help greatly appreciated.
Solved! Go to Solution.
08-14-2008 10:12 AM
RME is timing out trying to fetch data from the CISCO-FLASH-MIB. Try increasing the SNMP timeout for these devices under RME > Devices > Device Management > RME Devices > Edit Device Attributes.
08-14-2008 10:12 AM
RME is timing out trying to fetch data from the CISCO-FLASH-MIB. Try increasing the SNMP timeout for these devices under RME > Devices > Device Management > RME Devices > Edit Device Attributes.
08-14-2008 10:41 AM
Thank you so much Joe, exactly right!!! it's solved.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide