cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
362
Views
0
Helpful
1
Replies

Which WLC interface should be resolved from cisco-lwapp-controller.domain

Hi,

we use several 4402 wlc and want the aps connect to connect to them via dns discovery.

It would be fine if somebody could tell me to which ip address (in our dns database) I have to add an alias for cisco-lwapp-controller.<domain>.

Is it the management interface, the ap manager interface or one/all dynamic interface(s)?

Is there any hint concerning this in the documentation?

Best Regards,

Thorsten

1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame
Hall of Fame

You use the management interface of the WLC.

Here is a good link also if you have issues:

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml#backinfo

-Scott
*** Please rate helpful posts ***

View solution in original post

1 Reply 1

Scott Fella
Hall of Fame
Hall of Fame

You use the management interface of the WLC.

Here is a good link also if you have issues:

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml#backinfo

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card