gk/ipipgw to gk/ipipgw

Unanswered Question
Aug 15th, 2008
User Badges:

In the following setup:

vct - gk/ipipgw - fw - internet - fw - gk/ipipgw - vct

2 vct's are registered on a gatekeeper with integrated ipipgw (cube) on 2 different locations. When setting up a session from vct1 to vct2 the call is terminated on the incoming call leg with a normal call clear.

attached the config on the receiving gk/ipipgw and the outcome of: sh gatek call.

The config of GK1 is similar.

Any ideas why the call isn't passed on two the outgoing call-leg?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Marwan ALshawi Fri, 08/15/2008 - 07:23
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

as i can see there is firewall in the path

have enabled the h323 signaling thorugh these firewalls and have enabled h323,h225 inspection ??

tonny.ausema Mon, 08/18/2008 - 23:00
User Badges:

Thanks for your suggestion. There is a h323 enabled firewall between the 2 BE's passing h323, h225. And I can actually see the call comming in on the 1st call leg of the 2nd BE but it terminates there.


This Discussion