Phone rings 3 times before going to voicemail

mmonteiro11 · ‎08-15-2008

Can I decide how many rings before the caller goes to voicemail? If this a phone setting? Also, am I able to disable call waiting for my phone?

Jaime Valencia · ‎08-15-2008

yes, this can be changed thru the service parameters for all phones or per line at the line config page. a ring means about 4 seconds so just do the math.

if you do not want call waiting change the busy trigger to 1 on the line.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Rob Huffman · ‎08-15-2008

Hi Michael,

If you are using Callmanager (later than CCM 4.1) you can change the number of rings before FNA to voicemail using this setting

(under>Device>Phone>Directory Number Configuration)

No Answer Ring Duration (seconds)

If you want to change this "system wide" let me know as this can be adjusted as well.

To disable Call Waiting for the phone change the Busy Trigger to 1

(under>Device>Phone>Directory Number Configuration)

Hope this helps!

Rob

mmonteiro11 · ‎08-15-2008

So this cannot be set using the IP phone? It sounds like it has to be set using some software called CallManager. If so, I'll have to talk to our IT guy.

Jaime Valencia · ‎08-15-2008

ohhh your question was how to set it on the ip phone???? no way to do that, has to be done on callmanager

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate