ATA 188 SIP prepend prefix not configured

Unanswered Question
Aug 16th, 2008

Hi all, I'va a problem. I think that It's a bug. I've 1500 Cisco ata 188 SIP with last firmware 3.02.01.

ATA works well but after some days outgoing call fails because ATA prepend a prefix not configured in Dail-Plan.

This is SIP log from ATA:

[0]StartTone 0

[0]DTMF 3 , insum:551998

[0]DTMF 4 , insum:572969

[0]DTMF 9 , insum:556244

[0]DTMF 3 , insum:551264

[0]DTMF 0 , insum:581505

[0]DTMF 4 , insum:573291

[0]DTMF 8 , insum:573706

[0]DTMF 4 , insum:573368

[0]DTMF 0 , insum:581110

[0]DTMF 0 , insum:580918

7236:30;2,0,0,0,

Calling 3493048400

[13]Call Prefix:ù~+3493048400

SCC Cmd[0:0]CLIP

SCC Cmd[0:0]CALL

[0]INVITE Retry 0

[0:0]Tx Msg to 10.35.0.140:5060

INVITE sip:ù~[email protected];user=phone SIP/2.0

SIP/2.0 100 Trying

SIP/2.0 407 Proxy Authentication Required

ACK sip:ù~[email protected];user=phone SIP/2.0

INVITE sip:ù~[email protected];user=phone SIP/2.0

SIP/2.0 100 Trying

SIP/2.0 404 User Not Found

ACK sip:ù~[email protected];user=phone SIP/2.0

SCC Cmd[0:0]RELEASE

CCBS expired

>>> SIP Soft Reset [0:0] <<<

From log you can see the prefix ù~ not configured in my Dial-Plan:

**2|#21#|*21*t4>#-|**1t4>#-|*St4-|#St4-|118|112|113|115|1>#t8.r9t2-|0>#t811.rat4-|^1t4>#.-

After a reset (http://ip_addr/reset) all works well again, no prefix are prepend.

What's your opinion? Thanks.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Daniele Giordano Sat, 05/09/2009 - 08:21

This is a bug casued by wrong dial-plan.

With this dial-plan ATA works well: **2S|**1St4>#-|#21#S|*21*St4>#-|11.|.t8>#r6t4-

Actions

This Discussion