we are configuring snmp traps on routers which connects to the main site thru VRF.
-the NMS is receiving traps with the identtity of the router as its tunnel interfce ip address.
-ALSO hostname is included in the identity
QUESTION:is there any way to make this identity say the f0/0 or f0/1? not the tunnel i/f.
the ff is the config of 1 of the router.
interface FastEthernet0/0
description *** Connect to Main
ip address 1.1.1.1 255.255.255.0
duplex full
speed 100
!
interface FastEthernet0/1
description *** InternalConnection siteA
ip vrf forwarding pcd-vrf
ip address 11.1.1.1 255.255.255.0
duplex auto
speed auto
interface Tunnel0
description TUNNEL TO MAIN SITe
ip vrf forwarding pcd-vrf
ip address 101.0.0.1 255.255.255.252
tunnel source FastEthernet0/0
tunnel destination 201.0.0.1 255.255.255.0
